Full Fibre Is Here. Why Your Home Network Is Now the Slow Part
The money has been spent on the cables in the street. The last 20 metres, inside your house, is where the speed now goes missing.
For twenty years the broadband coming into a UK home was slower than the network inside it, so nobody noticed the cables, the router ports or the WiFi. Full fibre has reversed that. A 1 Gb or faster line now arrives at a home network built for 100 Mb, and the house has become the bottleneck.
In short
- Your internet connection is the line from the street to your router. Your home network is everything after it: the router, the cables, the switches and the WiFi.
- Old broadband ran at 20 to 80 Mb, so home kit rated for 100 Mb or 1,000 Mb (1 Gb) always had speed to spare.
- Full fibre packages now run from 500 Mb to 2 Gb and beyond, which is faster than most routers, cables and WiFi already in the house can pass on.
- The usual culprits are a 1 Gb router port, old Cat5 cable that tops out at 100 Mb, and WiFi that loses most of its speed two rooms away.
- Fixes range from one Cat6 cable at £80 to £250 to a fitted mesh WiFi system at £300 to £800.
Two networks, not one
People say "the internet is slow" about two different things. It helps to split them.
Your internet connection is the line your provider owns: the fibre or copper from the street to the box on your wall. Its speed is the number on your bill. Engineers call this side the WAN, for wide area network.
Your home network is everything on your side of that box: the router, any cables in the walls, the switches that share one cable between several devices, and the WiFi. Engineers call it the LAN, for local area network. Nobody but you pays for it, and in most homes nobody has looked at it since the day the router went in.
Every film, video call and download has to travel through both. The speed you get on the sofa is set by the slowest part of the whole journey, wherever that part is.
What Mb and Gb mean
Speeds are measured in megabits per second, written Mb or Mbps. A gigabit, written Gb or Gbps, is 1,000 megabits. So a "gigabit" line is 1,000 Mb, about 12 times the fastest speed the old copper network could deliver.
As a rough guide, a 4K film stream needs about 25 Mb and a video call needs under 5 Mb. A family rarely needs 1 Gb at one moment. What a fast line buys is headroom: big downloads finish in minutes, cloud backups do not stall the house, and ten people can be busy at once without anyone noticing.
Why nobody felt the pain before
For most of the 2000s and 2010s, broadband arrived over the copper phone line. ADSL gave most homes under 20 Mb. Fibre to the cabinet, the green box at the end of the road, lifted that to a ceiling of about 80 Mb.
Meanwhile the kit inside the house was already faster. Network cables and router ports were rated for 100 Mb (called Fast Ethernet) and later 1,000 Mb (Gigabit Ethernet). Even middling WiFi could manage more than the line could supply.
Think of a narrow country lane leading to a wide driveway. The lane sets the pace, so nobody ever checks how wide the drive is. A cheap cable, an old switch behind the TV or a router in a cupboard cost you nothing you could measure, because the internet itself was always the slowest link.
What changed: the investment went into the street
Over the last few years, billions have gone into replacing copper with full fibre, where a glass fibre runs all the way into the house. Ofcom's Connected Nations reports show it now reaches most UK homes, and it is widely available across Sussex.
At the time of writing, the common packages are 500 Mb and 900 Mb, the big providers sell 1.6 Gb to 2 Gb, and some smaller networks go further still. The lane has become a motorway, and it now ends at the same driveway.
That is why we are seeing more people invest in their home network than ever before. They upgrade the broadband, run a speed test in the bedroom, see 90 Mb on a 900 Mb line and assume the provider is at fault. Usually the provider is delivering exactly what it promised, to the router. The loss happens after that.
Where the speed goes missing indoors
These are the weak links we find most often, with what each one caps you at.
| Weak link | What it limits you to | The fix |
|---|---|---|
| Old Cat5 cable, or a damaged cable of any type | 100 Mb | Replace the run with Cat6 |
| Old switch or powerline adapter | Often 100 Mb, sometimes less | A gigabit or 2.5 Gb switch, or a proper cable |
| Router or switch with 1 Gb ports | Just under 1 Gb, however fast the line | Kit with 2.5 Gb or 10 Gb ports |
| Cat5e cable | 1 Gb, usually 2.5 Gb on a sound run | Fine for most homes; Cat6 for new work |
| WiFi through two or more walls | Often 50 to 200 Mb | Access points wired back to the router |
| Wireless extender or wirelessly linked mesh | Can halve the speed at each hop | Cable between the mesh units |
| The device itself | Older phones, TVs and laptops: 100 to 400 Mb | Nothing to fix; test with a newer device |
Cables
The category printed on the cable's sheath tells you its limit. Cat5 is rated for 100 Mb. Cat5e is rated for 1 Gb and will usually carry 2.5 Gb. Cat6 carries 10 Gb on runs up to about 55 metres, and Cat6a does 10 Gb over the full 100 metres. A cable with one broken wire inside often still works, but quietly drops to 100 Mb, which is one of the most common faults we find. Our guide to running Ethernet cable through a house covers routes and costs.
The router and switches
Most routers sold before about 2023 have 1 Gb ports. Put a 1.6 Gb line on one and the most any single cable can carry is just under 1 Gb. Providers now tend to supply a router with at least one 2.5 Gb port on their fastest packages, but a 1 Gb switch further down the line puts the cap straight back.
WiFi
WiFi is where most of the speed is lost, because radio weakens with every wall. Standing next to a modern router, a recent phone can pass 1 Gb. Two rooms away, 100 Mb is a good result. A newer standard helps in the same room but does not change how walls behave, as we explain in is Wi-Fi 7 worth it. The fix is more access points, closer to where you sit, each fed by a cable. That is the difference between a wired system and the plug-in boosters covered in mesh WiFi vs extenders.
How to tell which side is slow
- Plug a recent laptop into the router with a cable and run a speed test. This measures your internet connection with the WiFi taken out.
- If that result is close to the speed on your bill, the provider is doing its job and the loss is in your home network.
- If the laptop reports exactly 100 Mb or just under 1,000 Mb, the cable, the port or the laptop's own network socket is the limit, not the line.
- Run the same test over WiFi in the rooms you use most and note the numbers. The drop between step 1 and here is what a better home network gets back.
If the wired test is slow too, speak to the provider first. If only the WiFi results are poor, start with the free fixes in how to improve your WiFi signal.
What to upgrade first, and what to leave alone
Do not rip everything out. Spend in this order, and stop when the rooms you use are fast enough.
- Move or wire the WiFi. One Cat6 cable to a second access point upstairs fixes more homes than any new router. A single run costs £80 to £250 at the time of writing.
- Replace the weak link, not the whole chain. A 100 Mb switch behind the TV or a tired powerline adapter is a £20 to £60 problem.
- Fit a proper wired mesh or access point system if the house is large, old or has thick walls. We fit these for £300 to £800 depending on size; our mesh WiFi buying guide names the kit we would choose.
- Go to 2.5 Gb or 10 Gb only if you pay for more than 1 Gb, or move large files between your own computers and storage. Our UniFi home network guide shows what that looks like.
We would skip paying for a faster broadband package until the house can use the one you have. A 500 Mb line delivered properly to every room feels faster than a 2 Gb line that reaches the bedroom at 60 Mb.
Paying for full fibre and not feeling it?
We test the line at the router, then room by room, and show you where the speed is lost before quoting a fixed price to get it back. See our WiFi and home network service, covering Horsham and the rest of Sussex.
Book a Free SurveyFrequently Asked Questions
Do I need a new router for full fibre?
Not always. For packages up to 900 Mb, a router with 1 Gb ports can pass the full speed, so the provider's router is usually fine at the socket. Above 1 Gb you need a router with a 2.5 Gb or faster port. In either case the WiFi coverage, not the router's top speed, is what most homes need to improve.
Why is my speed test much lower than the speed I pay for?
The advertised speed is measured at the router. A test on a phone over WiFi also measures your walls, the distance, the phone and everything else in between. Test with a laptop cabled to the router first. If that matches your package, the missing speed is being lost inside your home network.
Is Cat5e cable good enough for gigabit broadband?
Yes. Cat5e is rated for 1 Gb over 100 metres and a run in good condition will usually carry 2.5 Gb as well. Older Cat5 without the "e" is only rated for 100 Mb and is worth replacing. For any new cable we fit Cat6, because the extra cost is small and it supports 10 Gb on normal house runs.
How much does it cost to upgrade a home network?
At the time of writing, a single Cat6 cable run costs £80 to £250, a whole-house wiring day of 6 to 8 points is typically £600 to £1,200, and a fitted mesh WiFi system is £300 to £800. Most homes need one or two cable runs and better-placed WiFi, not all three.