Any Filament, Recognised by Your Anycubic ACE
ReSpool writes the NFC tag that Anycubic ACE 3D printers read to identify filament, so a spool from any brand is recognised like Anycubic's own. Free on Android and iPhone.
What ReSpool Does
Any Brand Recognised
ReSpool writes a blank NFC sticker with the material, colour and printing temperatures of the spool you actually have, and the ACE recognises it like its own.
Works with Home Assistant
Every tag gets a unique spool ID, so Home Assistant can tell two identical reels apart and show the filament left on each, straight from what the printer has extruded.
The Whole Anycubic Range
More than 600 genuine Anycubic product codes ship with the app and work offline, every colour of every line, with temperatures taken from scans of real spools.
OpenPrintTag Too
Read and write Prusa's open standard on ICODE SLIX2 tags. OpenTag3D and OpenSpool are supported as well.
Honest About What Is Left
Weigh a part-used reel and the app works out the filament left, writes it to the tag and can update it later. Write a second tag for the other face of the reel.
Safe by Design
A full backup is taken before anything is written, every page is read back and checked byte for byte, and the UID and lock pages are never touched.
Made in Horsham, West Sussex
We made ReSpool ourselves, for our own printers first. It is free, with no accounts, no adverts and no tracking.
Help and support
The app says my tag cannot be written
Anycubic's own tags are password-locked at the factory and cannot be reused. Use a blank NTAG213 sticker or larger, a few pence each online. OpenPrintTag needs an ICODE SLIX2 tag.
Nothing happens when I hold a tag to the phone
Check NFC is switched on in your phone's settings. Hold the middle of the back of the phone flat against the tag and keep it still until the app confirms. Cases thicker than a few millimetres can block NFC.
The printer does not recognise the tag
Scan the tag with the app first to see what is on it. Every write is read back and checked byte for byte, so a tag that scans correctly holds exactly what was written. The ACE reads one face of the reel: write a second tag for the other side and the reel is recognised either way up.
Something went wrong mid-write
A full backup of the tag is taken before anything is written, under Library, then Backups. Scan the tag again and restore the backup if needed. Nothing is lost.
How does Home Assistant fit in?
Every tag carries a unique spool ID, which the hass-anycubic_cloud integration for Home Assistant reads, so two identical reels can be told apart and the filament left on each is tracked.
Contact
Email [email protected] or call 01403 626006 (from outside the UK, +44 1403 626006). For a tag problem, tell us your phone model and what a scan of the tag shows.
Privacy
ReSpool has no accounts, no sign-in, no advertising and no analytics or tracking of any kind.
What leaves your phone
One thing, in one situation. When you scan a genuine Anycubic spool tag, the details of that filament product are sent to a public catalogue so other people can write the same filament without owning a reel of it: the product code, material name and colour, and its printing temperatures, speeds, weight and length.
What never leaves your phone
- The tag's serial number, which identifies a physical spool
- Anything that identifies you or your device: no device ID, no name, email or location
- Tags written by the app. Only factory Anycubic tags are shared, because only those describe a real product
- Your spool library, tag backups and settings
Your choice
You are told this the first time the app opens and can decline there. Sharing can be turned off at any time under About, then Share scans with the catalogue. With it off, nothing is uploaded and the catalogue others have built still works.
Where it is stored
The shared catalogue is held in Cloudflare Workers KV and is public. Because entries carry nothing personal, there is nothing personal to delete; a wrong entry is corrected by scanning a genuine spool, which replaces it.
Children
ReSpool is a tool for 3D printer owners and is not directed at children.
Our main privacy policy covers everything else we do. Last updated 22 November 2026.
Want an App Like This for Your Business?
We design, build and run iPhone, Android and web apps for local businesses and clubs. Tell us what you need and we will show you how it could work.